DeutschNews
Hydraulic Pump with Digital Pressure Indicator – Series HEM
8. October 2019
At the end of the year M-PT will finish further development projects. This includes our new pump for hydraulic torque wrenches. Today we want to present you this hydraulic pump HEM.
One decisive innovation is the modificated automatic mode. We were able to increase the bolting speed significantally. Furthermore the new hydraulic pump can be delivered with digital function. This is an additional option to display the pressure digitally on the remote control.
Another option, which will be offered soon, is the documentation system. Right now our development department does the final tests on this. With the documentation system the torque can be set directly on the pump, whereby the process reliability will be increased. The stored data of torque wrenches and calibration can be selected on the digital remote control. A torque table is not necessary any more.
More information you can find here:
Data sheet
Our new series MED-S
30. August 2019
We proudly present our new sensor-controlled torque wrench MED-S. The proven MED-series is extended by a sensor-controlled shut-off. Thereby the tool is insensitive to environmental influences, such as friction, temperature or joint hardness. The torque is measured on the square drive, that means directly on the socket of the tool. Mechanical alterations of the tool, e.g. wear on the gear, do not influence the bolting results. With this torquing tool one can tighten bolts by category A according to VDI/VDE 2862-2.
See for yourself!
We would like to submit you an offer.
More information
Publication in BWE Industry Report 2018
5. June 2018
In the newest BWE Industry Report “Wind Industry in Germany” M-PT explains the functionality and application of the Bolt Check Funktion – an optional feature of the electric torque wrench MED.
Click here to read the article:
BWE Industry Report 2018
New Smart Sockets 90 and 100
26. January 2018
We are pleased to introduce two new models of our Smart Sockets. The series is now extended by the wrench sizes 90mm and 100mm.
The Smart Socket uses RAD Torque‘s transducer technology combined with custom sockets to measure the torque applied to the socket during a torque cycle. Its compact size and innovative technology make the Smart Socket a perfect audit tool for inspecting bolted joints and can function as a master calibration for various torque tools. With special reducers from M-PT the tool assortment can be expanded.
More information you can find here.
A Christmas Greeting
11. December 2017
In the end of this year we would like to thank our customers for the good and successful cooperation. We wish you peaceful Christmas holidays and a successful New Year.
May the Holiday season bring you
all that’s good and nice.
May you find yourself surrounded by love and joy
and things that have no price.
With personal regards from
Michael Matjeschk,
managing director
The New MED 110
27. October 2017
Our MED series is now extended with a new electric torque wrench.
The new MED 110 achieves a maximum torque of 11.000 Nm. With only 13 kg and a overall length of 510 mm, this torquing tool is significantly smaller and lightweighter than the proved MED 120. This tool is suitable for bolting applications at high torques, while working ergonomically and safely.
Our new electric torque wrench is available in standard version (MED 110), a manual 2-speed machine (MED 110-2) as well as a bolting tool with angle gear (MED 110-90).
Convince yourself!
We are pleased to submit a non-binding offer.
Husum WIND 2017
25. September 2017
Two weeks ago the wind exhibition took place in Husum. The follow-up keeps M-PT busy, to finish all quotations and answer further questions as quick as possible.
We thank the numerous visitors for the interesting discussions about special bolting applications, difficulties in unique situations as well as all suggestions to improve our bolting technology. Together we want to find the perfect bolting solution for each individual customer. Therefore we are very open-minded towards ideas and suggestions, but also towards criticism.
Unfortunately, our stand was not opened on the 13.09.17, due to the red weather warnings. We feel sorry, if visitors did suffer any disadvantages. We hope, that all visitors could still clarify their questions and achieve their planned objectives.
The new product catalog from M-PT, which was presented at Husum WIND, can be downloaded online from the homepage.
Torque Wrench with Built In Torque Verification – E-RAD BLU-S
21. June 2017
We are pleased to introduce the new electronic torque wrench E-RAD BLU-S. The proven E-RAD series is now extended with the sensor-controlled torque shut-off. With that the torque wrench is insensitive of environmental conditions, such as friction, temperature and joint hardness.
We will gladly answer any questions you might have or prepare a non-binding offer free of charge.
New! The Hydraulic Tensioner MGR
30. May 2017
As of now, M-PT offers a new series of hydraulic tensioners.
Besides rotating tools to fasten bolts, we also offer tensioners for bolt sizes up to M64. Accessories, such as hoses and the hydraulic pump HEM 41-16, can also be purchased.
Technical data:
• Multistage tensioner
• For bolt sizes M20 – M64
• Mechanical stop as protection against destruction
• Time saving due to spring return
• Cycle counter optionally available
• Other sizes on request
Hydraulic Pump HEM 41-16
24. April 2017
Our hydraulic pumps are now extended with a new pump. The HEM 41-16 is our new two-stage hydraulic pump for tensioners and single-acting hydraulic tools.
Technical data:
• Working pressure: 1.600 bar
• Oil volume: 1,7 l
• Flow rate: Niederdruck: 0,7 l/min, Hochdruck: 0,1 l/min
• Dimensions: H = 400mm, B = 280mm, L = 276mm
• Weight: 33 kg
• Electric motor: 230 V, 50 Hz, 1,5 kW
• Cable remote control: 6 m
• Control electronics with status display and counter for cycles, maintenance and
operating hours
• Oil cooler
• High precision pressure gauge class 1,0
• Supporting and protecting steel bracket
• Quick release couplings
Hydraulic Low Profile Torque Wrench MFC-Series
28. March 2017
Today we proudly present our hydraulic low profile torque wrench series MFC. With its extreme flat and compact construction you can reach nearly every bolts and nuts.
Technical data:
• Torque range: 225 – 44.600 Nm
• Drive size: SW 19 – SW 175
• Repeatability: ± 3,0%
• Torsion retaining ratchet system
• 360° x 185° multi-positional swivel quick release couplings or screw couplings
• Pressure relief valve prevents over pressure
More information you can find here.
The New MED 45-90
12. March 2017
We are pleased to introduce the new MED 45-90.
Torques from 450 – 4.500 Nm at minimal height of setting.
Of course, this torque wrench has the additional option of a check program and the documentation system.
More information you can find here.
The New MED
26. September 2016
M-PT is pleased to introduce the new MED at the international tradeshow WindEnergy in Hamburg.
And these are the new features:
– Data logging and tool management features
– Data transfer via bluetooth
– Single point calibration on every bolting case
– Torque- and angle-controlled tightening incl. monitoring
(according to VDI/VDE 2862, class B)
– Pre-adjustments for high-strength friction grip fastening
– Trendsetting with industrie 4.0-standard
The new electric torque wrench is demonstrated at WindEnergy in hall B7/stand 436.
Our team looks forward to meet you there!
Here you can read the German flyer:
Flyer MED 2016
Publication in BWE Industry Report 2016
31. May 2016
Since last year M-PT is a member of the German Wind Energy Association (BWE). In April a new issue of the industry report “Wind Industry in Germany” was published. Therein M-PT introduces the innovation of the electric torque wrench MED as well as the electronic torque wrench E-RAD BLU with Smart Socket.
Click here to download the paper:
BWE Industry Report 2016
Start our Product Comparison Now!
17. March 2016
M-PT is pleased to introduce its new web presence. The newly designed appearance and the revised surface allow an user-friendly product navigation. With the unique feature “Product Comparison” all torque wrenches can be compared with each other. You just have to choose a target torque.
New Pneumatic Torque Wrench 40 DX
2. February 2016
The new year starts with the successful launch of the pneumatic torque wrench 40 DX!
This tool covers a further torque range in the series of our pneumatic torque wrenches.
With a maximum torque of 4.000 Nm at only 6,7 kg the 40 DX offers one of the highest power-to-weight ratios.